This is a list of elevator fixtures that have been used/made by Thyssen.


These fixtures consists of illuminating round glass buttons, and analog floor counter with illuminating numbers.


The fixtures used in early 1980s Thyssen elevators were round illuminating plastic buttons, and analog floor indicator with lamps positioned vertically. The hall call button panel looks the same as the 1970s type. These fixtures might have been made by Schaefer.

Schaefer MT 28

These fixtures uses Schaefer MT 28 square metal buttons with a yellow lamp on the top left side of the button. Floor indicators were segmented LED dot matrix with triangular arrows.

Series 44

These are round metal buttons with red illuminating halo. Usually the floor numbers are not indicated on the buttons, instead they are engraved on the car station just next to the buttons.

Floor indicators and hall lanterns

Most later Thyssen elevators installed in the 1980s have red LED digital floor indicators and hall lanterns which lights up orange. Some of these hall lanterns have small digital floor indicator.


STEP Series

Not to be confused with Shanghai STEP Electric Corporation.


These fixtures consists of black square buttons and green LED floor indicators. Buttons have a small red lamp on the top and a green film inset as the labeling. Floor indicators are either LED digital segments or dot-matrix, and rarely the floor counter inside the elevator can be an analog indicator[1]. The arrows are green dots and displayed in a shape of a transparent triangle. After the merger with Krupp, ThyssenKrupp continued using these fixtures throughout the early 2000s for few times, then later ThyssenKrupp replaced this fixtures with STEP Classic; all buttons are now aluminium and floor indicators have been enlarged with large LED dot-matrix display.

STEP Classic

These buttons are square aluminium with red illuminating halo. They are based on the black STEPMODUL fixtures. Nowadays these fixtures are still being made by ThyssenKrupp as the STEP Module/Module Classic in Asia and STEPMODUL in Europe.

STEP Solid

STEP Solid are square metal buttons with round concave buttons and a small red lamp above the button.

MT 42

MT 42 are rounded square stainless steel buttons with red illuminating halo. These buttons were made by Schaefer.

Type 44

These buttons are round and stainless steel with either red or amber illuminating halo.

Unknown vandal resistant buttons

These are square grey metal buttons with braille and a red lamp next to the button. For the floor indicators it uses the 1990's STEP Basic display with green LED dot matrix.


Thyssen's Studio buttons are very rare. They are very similar to the North American ThyssenKrupp Signa4 buttons, but have a second halo in the shape of a rounded square that does not light up. The call button plates are just like a regular rectangle call but plate but are rounded on the corners.

Segmented floor indicators

Thyssen often use digital segmented floor indicators on some elevators from the late 1990s to 2000, usually when Schaefer MT 42 buttons are used.

U.S. Soft-Touch fixtures

A few Thyssen elevators in Canada use U.S. Soft-Touch fixtures. It is unknown if any of them use the U.S. vandal resistant fixtures.

Top Line

Top Line (also known as "Frequencedyne" and sometimes "Discovery") was a fixtures line first developed by a defunct Brazilian elevator company Elevadores Sûr in the 1990s. These fixtures consists of small, black plastic buttons with grey number/braille plates and digital segments floor indicator displays[2]. Thyssen continued on the production of these fixtures when they acquired the company in 1999. The design remained largely the same like it was except that the logo was changed from Elevadores Sûr to Thyssen. They were later re-produced by ThyssenKrupp during the 2000s for the Central and South American market.

Generic fixtures

Some Thyssen elevators from the mid-1990s onwards are using Dewhurst fixtures, mainly in the United Kingdom and Hong Kong. A few Thyssen elevators in the United States uses Innovation Universal fixtures.

See also

Notes and references

External links

List of elevator fixtures by manufacturers

Main topic: Elevator fixtures

Official fixtures by elevator companies: Amtech ReliableArmorAtlas (Northern CA)Bennie LiftsBoralDeveDong YangDoverElevators Pty. Ltd.Evans LiftsExpress EvansExpress LiftFiamFujitecGoldStarHammond & ChampnessHaughtonHaushahnHitachiHyundaiIFEIndoliftJohns & WaygoodKleemannKone (North America) • LGLinesLouser LiftMarryat & ScottMashibaMitsubishi (North America) • MontgomeryMPOrona/Electra VitoriaOtis (North America, South Korea/Otis Elevator Korea) • PaynePickerings LiftsSabiemSchindler (North America) • SchlierenSeabergShanghai MitsubishiSigmaStaleyStannahThymanThyssenthyssenkrupp (North AmericaKorean fixtures) • ToshibaU.S. ElevatorWestinghouseXizi Otis

Generic elevator component companies fixtures: AdamsBuy Elevator Parts Co.C.J. AndersonDewhurst (ERM) • DMG/MADEpcoEverbrightGALHong JiangInnovation IndustriesJinlixKronenbergLester ControlsLiSAMonitorPTLSalientSchaeferShanghai STEPTung DaVega

For other unknown fixtures, please refer to list of unknown elevator fixtures‎‎ page.